Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1104 Results
A turnkey 5G Field-to-Lab solution based on R&S®CMX500
5G New Radio (NR) is the fifth-generation radio interface and radio access technology (RAT) which was officially published by 3GPP in release 15. With the 5G technology, it enters a new era to meet the ever-increasing demands of mobile communications not only in the conventional cellular communication world, but also in the vertical industries.Since the commercialization of 5G NR, worldwide 162 networks have been deployed as per the report of GSA. On the path to the 5G NR network commercialization and service launch, field test is one of the essential user centric processes that User Equipment (UE) vendors should go through. Sophisticated features and versatile deployment options have to be thoroughly checked to ensure the reaching of certain confidence level before the official launch.However, field test is often linked with some challenges, such as► High costs due to the extensive drive tests► Time tedious analysis of a drive test that lowers the efficiency► Lack of test repeatability that makes the regressing tests impossibleWhat if providing an alternative solution in a laboratory environment to cope with all above mentioned challenges during the field test? R&S® as a world-wide well established test measurement equipment manufacturer and solution provider developed a 5G field-to-lab (F2L) turn-key solution, R&S®CM360°. It features► the simulation of the network with the real network configurations to avoid the cost intensive drive test by utilizing mobile radio tester R&S®CMX500► intuitive tools to visualize, drill down the problems and therefore enhance the debugging efficiency based on R&S®SmartAnlytics► the specialized key performance indicator (KPI) tests configured through real network data offered on R&S®CMX500 that guarantee the test reliability and repeatabilityThis application note aims to demonstrate the status of quo R&S®CM360° F2L solution.
16-Jul-2021 | AN-No. 1SL369
With the R&S®RTO-K17/RTE-K17 High Definition Option the user will see more signal details with up to 16 bit vertical resolution.In combination with the superior analog front end of the R&S®RTO and R&S®RTE, the user has a versatile instrument in his hands to analyze a wide range of applications. From Switch Mode Power Supplies to Radar RF, the user can inspect all with one scope.
13-Apr-2015 | AN-No. 1TD06
The R&S®RF Ports Alignment Software together with the R&S®SMW-K545 option provides a standard and tailored solution for calibrating and aligning the amplitude, group delay and phase between the RF ports of multiple coupled dual-path or single-path R&S®SMW200A vector signal generators. In addition, the R&S®Pulse Sequencer Software supports users to calculate the required signals for interferometric direction finding (DF) test cases. The R&S®SMW200A signal generator hardware together with the aforementioned software packages enables precise angle of arrival (AoA) simulation for testing the true performance of interferometric direction finders or emitter location systems.
08-Jul-2022
This application note explains how to synchronize the signals from multiple R&S®SMBV100A vector signal generators in time.The synchronization of the instruments is based on a master-slave principle where one R&S®SMBV100A acts as master and supplies all necessary synchronization signals to the other instruments (slaves). The setup is simple and provides highly synchronized test signals. Time synchronous signals are needed in several applications. The master-slave setup is ideal for basic MIMO tests, certain GNSS test scenarios and WLAN IEEE 802.11ac non-contiguous channel generation. Furthermore, synchronous baseband signals are the basis for generating phase coherent RF signals with the R&S®SMBV100A.
09-Jul-2013 | AN-No. 1GP84
The MHL standard specifies the transmission of high-definition audio and video data on five individual lines, as well as the exchange of bidirectional control information and the supply of power from the sink to the source. Over 200 million portable CE devices - such as mobile phones, tablet PCs and cameras - already use this interface to present content onto larger screens. To ensure functionality and interoperability, every new MHL-capable device must, before entering the market, undergo thorough tests at an authorized test center (ATC) in line with the compliance test specification (CTS) issued by the MHL Consortium. This application note provides an overview of the MHL technology and also describes the Rohde & Schwarz compliance test solution for the system part of the current MHL2.0 standard version.
14-May-2013 | AN-No. 7BM83
radio signals, radio services, sensitive radiocommunications systems, radio-controlled landing systems, automatic landing systems, air traffic control, UMS100, ARGUS Automatic monitoring of radio signals at airports interfering with radio services Automatic monitoring of radio signals at airports interfering with radio services radio signals, radio services, sensitive radiocommunications systems, radio-controlled
04-Sep-2006
- not available -
20-Jul-2001 | AN-No. 7BM18
This application note gives a short summary on how to use harmonic mixers in combination with Rohde & Schwarz Signal and Spectrum Analyzers. Focus of this application note is the use of conversion loss tables with different R&S analyzers. It also provides a tool to convert different formats of the conversion loss tables.
06-Aug-2010 | AN-No. 1EF75
Reliable small cell planning is essential for important deployments like hospitals, manufacturing facilities, simply VIP (CxO) office floors or meeting rooms (the list of examples is endless). Often planning tools do not provide this high reliability and required accuracy.This application note is a simple step-by-step guide that introduces a practical method to perform reliable small cell planning.
09-Feb-2017 | AN-No. 1MA297
Automotive radar is vital to the advanced driver assistance systems (ADAS) that will help achieve Net Zero (zero accidents, zero fatalities) targets in the automobile industry. In a driving environment, radar sensors must detect real objects even when there is interference. The R&S®AREG800A automotive radar echo generator is essential to any solution that tests radar sensor immunity to interference.
15-Jun-2023
The R&S®CMW-B400B audio board offers the flexibility to measure and quantify audio applications with the R&S®CMW270/280/500 radio communication testers.
20-Jun-2013
This application note describes the different memory types and locations that user information can be stored in a spectrum analyzer R&S® FSP, R&S® FSU or R&S® FSQ, as well as the different ways in which it can be erased/cleared for security reasons.
20-Sep-2004 | AN-No. 1EF53
Using the optional three-port or four-port adapter (ZVR-B8 and ZVR-B14), PORT 1 and PORT 2 of the network analyzers of the ZVR family (ZVRL, ZVRE and ZVR) can be expanded to up to four ports. Thus automatic measurements on three- and four-port DUTs can be easily performed without any reconnection of ports being required. With the electronic switches in the adapters, switchover between the various ports is fast to the extent that the known high measurement and display speed of the analyzers of the ZVR family is fully maintained.
04-Aug-1998 | AN-No. 1EZ37
RF physical layer specifications (such as 3GPP TS36.104) describe a variety of requirements that the end equipment needs to meet. This application note provides insight into some of these specifications and how test & measurement equipment can simplify the task of deriving requirements for RF sub-systems.
10-Apr-2013 | AN-No. 1MA221
From designing a test setup to performing accurate measurements
Double-Pulse testing is a standard test-method used in power electronics design. Accurate measurements require a careful design of the test setup and the selection of the right measurement instruments. This application note discusses important aspects of double-pulse test setups as well as how to perform accurate measurements.
22-Mar-2021 | AN-No. GFM347
Compliance testing is essential to ensuring that dynamic random access memory (DRAM) signals meet the JEDEC specifications for parameters such as timing, slew rates and voltage levels. For system verification and debugging, eye diagram measurements are the most important tools for efficiently analyzing the signal integrity in any digital design. The specific nature of DDR requires a dedicated solution with a powerful read/write separation to get meaningful eye diagrams on the DDR data bus.
19-Feb-2019
This application note briefly summarizes the history of SCPI and outlines in which fields of application a SCPI based test system software has still advantages over a driver (e.g. IVI) based approach. Further the unique features of the high-end R&SSMW 200A vector signal generator that allow an increase in efficiency of SCPI based test system software development are introduced and operating guidelines are provided.
18-Oct-2017 | AN-No. 1GP98
Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-5 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-5 measurements on transmitter characteristics, receiver characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5, 6 and 9 with standalone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I with power class 3 in RMC 12.2 kbps + HSDPA is attached to this application note.
13-Oct-2009 | AN-No. 1CM72
This document answers frequently asked questions regarding Rohde & Schwarz Broadband Amplifiers. It describes remote operation and monitoring of the R&S® Broadband Amplifier series through a standard web browser.
04-Nov-2016 | AN-No. 7TA1
This application note describes how to test audio amplifier audio characteristic using the audio analyzer R&S® UPV in accordance with standard IEC 60268-3. The test items include gain, frequency response, harmonic distortion, modulation distortion, difference-tone intermodulation, dynamic intermodulation distortion, noise and cross-talk. The test items are explained and the test steps are described in detail.
13-Feb-2008 | AN-No. RCS0704-0032
As phase noise becomes an increasingly important system-level specification for electronic test equipment, communications systems, and radar systems. It is not only important to quantify the noise produced by oscillators, but also the noise added by each component in the signal processing chain. This application note reviews the fundamentals of residual or additive noise and addresses measurement techniques for determining the amplitude (AM) and phase noise added by two-port devices such as: amplifiers, mixers, block frequency converters, multipliers, dividers, and frequency synthesizers.Additionally, the Rohde & Schwarz FSWP phase noise analyzer will be introduced and a discussion of residual noise measurement techniques for the above-mentioned devices will be provided.
09-Oct-2017 | AN-No. 1EF100
Rohde & Schwarz presents a customizable solution for testing GNSS receivers to ensure a certain resilience against (legal) interference from neighboring bands.
18-Jul-2017
based on SCPI command sequences
MINX – the Measurement Instrument Network eXplorer – is a fast, non-invasive discovery and configuration software from Rohde & Schwarz for LAN and USB T&M instruments.Agnostic of instrument model or manufacturer, MINX provides an intuitive graphical user interface with access to powerful configuration, control, results collection and remote display functions.Test or research engineers can quickly setup a collection of instruments to initialise, measure and download results. Universities can configure and manage many instruments together, copying instruments and saving class setups.Besides these core functions, MINX provides an extension mechanism making even more sophisticated instrument operations available by just the click of a single button. Such extended functions are SCPI-based command sequences which can be added by the user on a per-instrument basis and require no software update.This application note describes the different kind of extendable function groups. It will be pointed out how extended functions can be added or edited and which format the script must comply in order to get directly available in MINX.
12-Jan-2021 | AN-No. GFM344
This application note describes how to measure balanced reflection mixed mode S-Parameters with a 2-port Network Analyzer like R&S® ZVL. The application note directly transfers S-Parameter Trace Data from R&S® Network Analyzers to Microsoft™ Excel™ using a direct connection like GPIB or LAN and does the mode conversion to Mixed Mode inside Excel™ with a VBA Macro.
14-Feb-2008 | AN-No. RSI05
This application note describes how the transmitter landscape of a DVB-T2 single-frequency network (SFN) can be simulated in multiple input single output (MISO) mode in order to test the compatibility and performance of receiver modules. Neither an external T2-MI gateway nor a GPS receiver is required - just an R&S®BTC equipped with two RF paths. Alternatively, one R&S®SFU coupled with one or more R&S®SFU, R&S®SFE, R&S®SFE100 or R&S®SFC can also be used. R&S®ETL or R&S®ETC are suggested to fine-tune the synchronization between the generated RF signals.
03-Feb-2014 | AN-No. 7BM80
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the iPad. On the iPad, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and iPad are connected via WLAN (also denoted as Wi-Fi network).
28-Mar-2013 | AN-No. 1MA216
As the data rates in high-speed digital designs increase, the limits for overall system jitter become tighter. This especially applies to the various components of the clock tree, where the jitter limits for reference clocks, clock buffers and jitter attenuators are even tighter. Due to their high phase noise sensitivity, phase noise analyzers are the instruments of choice for these tests.
08-May-2018
The OneWeb satellite constellation provides global broadband data access to almost every user. Via user terminals, the satellite connects the remote users to the ground station, which has access to the terrestrial broadband network. Receivers and RF equipment in the OneWeb ground stations and the user terminals need to handle high-speed microwave data links.
24-Apr-2018